Diamond Blades, Grinding Wheel & Cutting Wheel for Foundry
Home » Products
  • Support
  • Tech TipsNever twist or turn a segmented wheel in the cut because it may result in segment breakage
    Never use wet wheel dry
    Remove dry wheel from cut for 10 seconds of each minute of to cut air cool
  • Technical
  • Coated AbrasiveOne major cause of breakage with coated abrasive belts and discs can be traced back to improper storage. Failure to store these products under the correct conditions can lead to breakage. For example an wire cup brush or belt improperly stored can lose its shape ...
  • Cup BrushThe brush diameter and length of fill material are the determining factors for the surface working result. A combination of smaller diameter brush body and greater length of fill material results in soft and flexible brushes which are ideally suitable for the treatment ...
  • Diamond BladesMounting Instructions
    The hole size of diamond blade must correspond to the diameter of machine in use. Arrow on the blade shows direction of rotation.
  • Flap WheelSpeed: High-speed pistol grip air sander speeds typically exceed the speed of abrasive flap discs. For example, 5" flap discs are usually rated for 13,000 rpm and high-speed pistol grip air sanders are typically rated for speeds of 14,000 to 22,000 rpm. In addition, many of these tools are ...
  • Non-Woven Web Hand PadsDesigned for light manual grinding, deburring and cleaning work on metals, plastics, glass-fiber reinforced plastics, stainless steel, aluminium, paint, coatings and fillers.
    Due to their flexibility
  • Resin-Bonded Grinding WheelResin bonded abrasives are sensitive to atmospheric influences and their quality gradually deteriorates. The storage temperature should be between 10° and 30° C, and the relative humidity should not exceed 70 %. Under such conditions, the physical properties remain unchanged for a year.
  • Vitrified Grinding WheelVitrified bonded grinding wheels are not sensitive to atmospheric influences. Due to their fragility, they are however very sensitive to impact, because this causes cracks that are undetectable by the human eye, but may cause grinding wheel rupture at the beginning of work.
  • Trouble Shooting
  • About Cup BrushIncrease surface speed by a) brush diameter, b) RPM
    Decrease trim length
    Increase diameter of fill material ...
  • About Diamond BladeThere are several other causes of segment loss. Below is a list of causes and cures of segment loss. :
    Cause:The material and/or saw was not held firmly, which caused the blade to twist or jam in the cut and loosen the segment.
    Cure:Hold material or saw firmly.
  • About The Abrasive Cloth BeltToo much work pressure:
    reduce pressure
    use coarser grit
  • About The Vitrified Grinding WheelPROBLEM: POOR STOCK REMOVAL
    POSSIBLE CAUSE: Insufficient pressure applied wheel too coarse or hard inadequate abrasive
    SUGGESTED CORRECTION: Increase pressure to use all available power ...
  • ApplicationsMade with multiple layered non-poisonous, non-allergic and non-stimulating materials
    Adjust the bandage strip and the built-in bandage foam cushion to adapt to various face-shapes with comfortable sealing.
    High-efficient and strong electrostatic filtering materials, the filter efficiency achieves 99%
  • Bonded Abrasives
  • Resin Bonded Grinding Wheel
  • Grinding Wheel & Cutting Wheel for ConcreteMaximum performance for concrete, stone and bricks applications.
    MS Abrasives Company is among the biggest abrasive products manufacturers in China. You can find high quality grinding wheels, diamond blades ...
  • Grinding Wheel & Cutting Wheel for FoundryApplication of Grinding Wheel & Cutting Wheel for Foundry:
    Grinding Wheel & Cutting Wheel for Foundry are widely used in industries like Automotive, Shipbuilding, Machinery, Metallurgy etc. to grind welded seam, weld spot, cast burrs and repair metal surface defect. Maxim performance for Foundry applications.
  • Grinding Wheel & Cutting Wheel for MetalApplication of Grinding Wheel
    Grinding Wheel is widely used in industries like Automotive, Shipbuilding, Machinery, Metallurgy etc. to grind welded seam, weld spot, cast burrs and repair metal surface defect.
  • Grinding Wheel & Cutting Wheel for Stainless SteelApplication of Grinding Wheel & Cutting Wheel for Stainless Steel
    Maxim performance for stainless steel applications.
    MS Abrasives Co., Ltd has many years experience of making abrasive products.
  • Grinding Wheel & Cutting Wheel with Aluminum ArborAs a well-known abrasive products manufacturer in China, MS Abrasives Co., Ltd has maintained a leadership position in technology and service of grinding wheels, diamond blades, sanding disc and other abrasive products.
  • Cup WheelDescription of Cup Grinding Wheel:
    Cup Grinding Wheel (Type 11 Wheel) is made from aluminum oxide, silicon carbide grain. These Cup Grinding Wheels are manufactured with a build-in safety nut flange. The heavy gauge steel fingers are molded into the body of the wheels.
  • PVA WheelOutstanding soft elasticity
    Forms smooth surface without deep abrading
    Porosity is adjustable and can avoid overheating and burning
  • Vitrified Bench Grinding WheelWe mainly provide two kinds of Vitrified Bench Grinding Wheels: one is aluminum oxide abrasives, and the other is silicon carbide abrasives. These grinding wheels could be with reducing bushings which allow the wheels to fit most standard arbor sizes.
  • Sharpening StoneA wide range of shapes, sizes and material compositions are available in Sharpening Stones. Stones may be flat for working flat edges or shaped for more complex edges. These Sharpening Stones may be composed of natural quarried material, or man-made material.
  • Small Grinding HeadA Shape: A-1 to A-40
    B Shape: B-41 to B-136
    W Shape: W-149 to W-244
  • Coated Abrasives
  • Abrasive Cloth, Abrasive Paper
  • Abrasive Cloth Rolls Description of Abrasive Cloth Rolls
    Abrasive Cloth Rolls are designed for fast and easy sanding of various surfaces. In addition, they can be torn to the exact length as needed.
  • Aluminum Oxide Cloth Abrasive Endless BeltApplication of Aluminum Oxide Cloth Abrasive Endless Belt
    Aluminum Oxide Cloth Abrasive Endless Belt is suitable for a wide range of metalworking applications, ideal for where cutting action is more important than conformability.
  • Aluminium Oxide Abrasive Paper RollFeature of Aluminium Oxide Abrasive Paper Roll:
    Aluminium Oxide Abrasive Paper Roll does close coating for maximum stock removal and uniform scratch pattern regarding surface treatment of hard, low-content woods.
  • Silicon Carbide Abrasive Paper Roll Application of Silicon Carbide Abrasive Paper Roll:
    B-paper backing style is excellent for dry sanding and finishing of polyurethanes. It can be used with manual and long belt sanders. Being suitable for sanding parquet flooring ...
  • Abrasive Paper SheetDescription of Abrasive Paper Sheet:
    Abrasive Paper Sheet is the abrasive product that can be soaked in water for long and can be utilized both in the humid and dry condition.
  • Flap Wheel, Flap Disc
  • Flap DiscDescription of Flap Disc
    Our flap discs are well manufactured by using high quality aluminum oxide or zirconium cloth. The material is superior due to its uniform particle size and premium blend of ingredients. Flap discs, as an alternative to sanding discs ...
  • Flap Wheel
  • Unmounted Flap Wheels, Aluminum Oxide ClothFeature of Unmounted Flap Wheels, Aluminum Oxide Cloth:
    General purpose
    Excellent for cleaning, deburring, polishing, blending
  • Flap Wheels on ShaftFeature of Flap Wheels on Shaft:
    Flap Wheels on Shaft are excellent for cleaning, deburring, polishing and blending.
    Application of Flap Wheels on Shaft:
  • Flap Disc Type AO (Aluminum Oxide Grain)Feature of Flap Disc Type AO (Aluminum Oxide Grain):
    Flap Disc Type AO (Aluminum Oxide Grain)features general purpose and long life. Closed coat structure is suitable for more material removal.
  • Flat Disc Z (Zirconium Grain)Feature of Flat Disc Z (Zirconium Grain):
    Extremely long life
    Closed coat structure for more material removal
  • Fiber Disc
  • Resin Fiber DiscsR01 Aluminum oxide fiber discs
    Feature: general purpose grinding and finishing
    R01 Zirconium fiber discs
  • Turbo Fiber Disc (Semi-Flexible Fiber Disc)Description of Turbo Fiber Disc (Semi-Flexible Fiber Disc):
    Turbo Fiber Disc (Semi-Flexible Fiber Disc)is the sanding disc that takes vulcanized fiber paper as basic body, the grinding tool made through adhering the abrasive medium ...
  • Velcro Self-Adhesive Disc without HoleFeature of Velcro Self-Adhesive Disc without Hole
    Velcro Self-Adhesive Disc without Hole is our abrasive product that has long lasting performance and fast removal rates for fine finishing of auto body, wood, metal, and marine applications.
  • Pressure Sensitive Adhesive(PSA) Sanding DiscFeature of Pressure Sensitive Adhesive(PSA) Sanding Disc:
    Long lasting performance and fast removal rates for fine finishing of auto body, wood, metal, and marine applications.
  • Delta/Triangular Sanding Sheets, Aluminium OxideDescription of Delta/Triangular Sanding Sheets, Aluminium Oxide
    The high performance Aluminium Oxide combined with a heavy paper backing makes Delta/Triangular Sanding Sheets durable and long-lasting.
  • Stripes Sanding SheetsDescription of Stripes Sanding Sheets:
    Stripes Sanding Sheets are the sanding discs that are more aggressive and longer lasting than regular sheets. This abrasive product is widely used by our global customers.
1 2